Lindy KVM Switch Especificações descarregar pdf (Página 47)

LINDY CPU Switch Smart Installation and Use Page 40

have these DDC lines connected.

Keyboard and PS/2 mice - 6 pin mini-DIN male connector to 6 pin mini-DIN male

connector with all lines connected straight through (1-1,2-2 etc.). If the PC has a 5-

pin DIN AT style keyboard connector you will need a PS/2 to AT keyboard adapter

6-pin mini-DIN female to 5-pin DIN male (readily available). For ‘interface powered’

operation without the optional power adapter the cables should be no longer than 5

metres (see section 2.4 for more details). For operation with the power adapter,

cables should be no longer than 30 metres.

RS232 serial mice - these require a special converter to connect the RS232 lines

present on the LINDY CPU Switch Smart mouse ports to the RS232 port on a PC.

Cables should be no longer than 30 metres.

NOTE - There are several common wiring specifications for 6-pin mini-DIN to

9-pin serial adapters. If you have an adapter that has been supplied with a

mouse it may have a completely different internal wiring to that shown above

and may not be compatible with the LINDY CPU Switch Smart

1 2 ... 42 43 44 45 46 47 48 49 50 51

Sem comentários

Lindy KVM Switch Especificações Página 47